Toggle Nav

SenseCAP S2100 LoRaWAN Data Logger, Supports RS485/Analog/GPIO Interfaces, LoRaWAN Converter

The SenseCAP S2100 Data Logger connects the sensor, collects the Data, and uploads it to the LoRaWAN gateway. It can support up to 100+ industrial sensors and 100+ grove sensors including various sensor types such as Analog/RS485/GPIO. It has a built-in battery and an IP66 enclosure, optimized for outdoor use cases that need reliable data collected over years. With Bluetooth 5.0 for easy configuration and firmware upgrade, It is also compatible with a wide range of frequencies(863MHz ~928MHz), different gateways, and LoRaWAN network servers.

In stock
  • 10+: $65.00


SenseCAP S2100 data logger can collect data from multiple sensors and transfer the data through the LoRaWAN network. It is a LoRaWAN converter that converts MODBUS RS485/Analog/GPIO sensors into LoRa-enabled sensors, and therefore transfers data through the LoRaWAN protocol. You can easily enjoy the advantages such as low power consumption and long transmission range, without affording the cost of changing the sensors you are using.


  • Strong Compatibility with Sensors: It can support 100+ industrial sensors including various sensor types such as Analog(0~10V/4~20mA), RS485, and GPIO(Pulse).

  • LoRaWAN Wireless Transmission: Ultra-low power consumption and ultra-wide-distance transmission range. It has Max.10 years of battery life and can cover a transmission range of 2km in urban scenes and 10km in line-of-sight scenes.

  • Industrial Design: -40℃ ~ 85℃ operating temperature and IP66 rating, suitable for indoor, outdoor, and harsh environments such as high UV exposure, heavy rain, dusty conditions, etc.

  • Easy to Use: The sensor can be used out-of-box through Bluetooth configuration, and users receive the data on the phone, cloud servers, and different platforms in just a few clicks.

  • Powerful APP Support: SenseCAP Mate APP allows you to set the sensor templates and quickly turn the data logger into the sensor you want. Templates can be exported and imported to support various applications.

  • Compatible with Worldwide LoRaWAN networks: It can be used with different types of LoRaWAN gateways and is compatible with multiple LoRaWAN Network Servers (Helium, TTN, etc).


Scan-and-Play: Easy Configuration via Bluetooth in Just 3 min

The Built-in Bluetooth 5.0 has reduced many configurations works, no need for connecting it to your computers or complicated wiring. You can easily configure the device in 4 steps:

  • Connect sensor to data logger by screwing
  • Connect App to Data Logger via Bluetooth
  • Set Parameters using Mate APP: Protocol, Power Supply, Data Parsing, etc
  • Check data on Mate APP or Web Portal

Support Industrial Sensors of Different Interfaces

The Mate APP allows you to configure Seeed's sensor parameters with one click to convert them to different types of LoRa sensors. It can also save the sensor parameters you configured as a template, which can be applied to the new data logger for deploying more sensors. You can download the APP here: 1. iOS; 2. Google Play; 3. App Center

S2100 LoRaWAN Data Logger is a single-channel collector, and only supports one of the following protocols at one time:

  • RS485: Support standard RS485 Modbus-RTU protocol
  • Analog: 2 x 0~10V or 2 x 4~20mA.
  • GPIO: 1 x GPIO, collect level or pulse signal

Support 2 Power Supply Modes: 19Ah built-in battery and 12V DC

When you use low-power sensors, the data logger can work in Periodic mode. Powered by a built-in 19Ah Li-SOCl2 battery, it can be installed and deployed without additional power.

When you use a sensor with high power consumption, the data logger can work in Constant Power mode to use an external 12V DC power supply. We provide a matching Junction Box Kit so that the data logger can be quickly assembled and deployed in outdoor environments.

Compatible with Global LoRaWAN® Network

LoRaWAN® network coverage is required when using sensors. S2100 can be connected to different LoRaWAN® gateways. Here are 2 options for choosing the LoRaWAN® network:


S2100 LoRaWAN Data Logger can quickly turn a wired sensor into a wireless sensor. At the same time, if your project needs more LoRa sensors, you can also use this data logger to quickly build the sensor you want.

  • Precision Agriculture: Collect various data required for agricultural production by connecting sensors such as pH and EC

  • Industrial Manufacturing: Connect industrial meters to collect data required for industrial manufacturing such as factory production and machine control

  • Smart Building: Connect sensors such as light sensors and air quality sensors, to collect various data in smart building scenarios
  • ....



Current Input

4 to 20 mA (2 channel)

Voltage Input

0 to 10V (2 channel)


RS485 Modbus-RTU Protocol

General Parameters

Product Model

SenseCAP S2100



Support Protocol

LoRaWAN v1.0.3 Class A

Built-in Bluetooth

App Tool to change parameters and set data conversion algorithm

Long-Range Channel Plan

IN865/EU868/US915/AU915/ AS923*

Max Transmitted Power



[email protected] BW=125KHz

Communication Distance

2 to 10km (depending on and environment)

IP Rating


Operating Temperature

-40 to +85 °C

Operating Humidity

0 to 100 %RH (non-condensing)

Device Weight




Battery (Contained in equipment)

Battery Life

Up to 10 years**

Battery Capacity

19Ah (non-rechargeable)

Battery Type

Standard D-size SOCl2 Battery

* Every single device can support 7 frequency plans.

** This data logger supports up to 10 years of battery life, but the actual battery life varies from data upload interval, data payload, and distance between gateways. If you want to optimize the Long Range battery life, you can choose to send a smaller amount of data, send messages less frequently, and keep Long Range spreading factor as low as possible.

Long Range Frequency

Note: No Frequency limitation. Sensor switched to other frequency plans at any time.

S210x Devices are manufactured to support the universal frequency plan from 863MHz ~928MHz in one SKU. That is to say, every single device can support the frequency plans below:

Frequency Plan

Common Name







Sub-band from 1 to 8



Sub-band from 1 to 8



AS923_1, AS923_2, AS923_3, AS923_4










The frequency plan setting is none by default and it will not transmit an RF signal until it has been set by App via Bluetooth at the first power-up. And it can be changed to other frequency plans at any time.







KA4*20mm Self-drilling Screw


Waterproof gasket



HSCODE 9031809090
USHSCODE 9026104000
RoHS 1



Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account